onsdag 28 september 2011

Olongapo armband...

... tänkte jag berätta om idag, för er som kommer ihåg så lovade jag detta i mitt inlägg angående 'Pluras' klocka...


Olongapo är en liten stad i Fillipinerna som under Vietnamkriget tillverkade specialgjorda armband åt Soldaterna på Subic Bay Naval Station, dessa blev väldigt eftertraktade och soldaterna beställde detta till sina Seikos och i vissa fall oxå Rolex klockor och fick armbanden med sina förbands emblem eller med emblem som symboliserade något annan för dom, nedan kan ni se några varianter av dessa...


Bild ifrån Scubawatch.org

Bild ifrån Scubawatch.org
Bild ifrån Scubawatch.org


Bild ifrån Scubawatch.org

Bild ifrån Scubawatch.org

Här nedan kan ni se lite olika emblem man kan välja mellan att få på sitt 'Olongapo' band, priset för ett verkar ligga på 200 USD inklusive frakt, verkar gå att beställa här

Bild ifrån kevinsrussiantime.com 

Här nedan ser ni 


'REAR ADMIRAL MICHAEL R. SEWARD 
RADM-USCG (R) 1978-2010'

Har på sig sitt ny-tillverkade 'Olongapo' band, ser rätt cool ut!

lördag 17 september 2011

Svamp...

...svamp och mera svamp, idag var vi ute och plockade svamp och det är helt otroligt hur mycket svamp det är i skogen nu, allt detta på 2tim !!!!! 

Vi hittade svart trumpetsvamp, rödgul trumpetsvamp, trattkantareller, kantareller och blek taggsvamp 

Slänger med en bild på min SubC i svampberget för att få lite klockanknytning...






torsdag 15 september 2011

Min nya 'Minicykel' ...

...är en mycket kär ägodel så jag tänkte visa upp den lite här på bloggen eftersom bloggen heter ju 'om klockor och annat' och detta får vara 'annat'

Min cykel är en så kallad minicykel av det supercoola märket 'Intersport' enligt uppgift tillverkade 'Monark' dessa till Intersport dvs så är denna är väldigt 'åtråvärd bland samlare.....NOT 


Jag gillar den skarpt, hade varit på jakt efter en beggad 'Jopo' men ej funnit någon, 'Intersporten' går som ett spjut i stadstrafik och har hög och lågväxel som man byter emellan med bakåttramp, skönt old school IMHO... 

Så denna racer har tagit mig till och från jobbet samt runt i stan hela denna sommar, är sjukt nöjd! 

Så här är den, en oceangrön/blå fröjd för ögat... 






tisdag 13 september 2011

Från band till armband...

...som jag informerade om igår är 'Paneristi's' beroede av att byta band men dessutom så verkar den senaste trenden vara armband av 'strykjärnssladdstyp' kan man säga det?

Dessa verkar finnas att köpa hos den anrika amerikanska firman J Crew och direktlänk till armbanden hittar du här och här och här




Pic from Paneristi.com

Pic from Paneristi.com

Pic from Paneristi.com


Pic from Paneristi.com
Pic from Paneristi.com

Pic from Paneristi.com




Pic from Paneristi.com

Själv så sportar jag ofta mina dinkor med 'egengjort döskalle armband' rätt coolt  tycker jag själv...



måndag 12 september 2011

Att byta band...

...är något som vi 'Paneristis' är bättre än dom flesta på, en Paneristi är en person som vurmar för märket Panerai och här kommer lite bilder på hur snyggt och roligt (men dyrt) det kan vara att använda olika typer av band.

Dom flesta band är handgjorda och priserna varierar men ett bra band kostar runt 200USD i läder och kan kosta det dubbla i kroko eller andra exotiska material...

Bilderna är ifrån en blog kollega som driver en Amerikansk Panerai Blog, kolla in den här


















onsdag 7 september 2011

Tissot TwoTimer...

...är en lite kul klocka tycker jag, en klassisk 80tals modell från Tissot som fanns i sjukt många varianter och den visar som namnet antyder två tider dvs både analgot och digitalt inte så speciellt kanske men det lite roliga med denna klocka är att man ställer alla funktioner (och det finns många såsom Time, date, chronograph, alarm, timer, second time zone) samt den analoga tiden med enbart kronan så det är inte helt lätt.

Quartzverket i 'TwoTimern' ska ha varit samma som fanns i dom tidiga Breitling Aerospace samt Rado Ceramica så det bör hålla en hög kvaliet.

Min variant som ni ser nedan är en lite dressigare variant i guld doublé som jag har på ett 'gold calf' band ifrån Hirsch och även om jag faktiskt inte använt den än (eftersom dom är rätt små) så tycker jag den är riktigt cool och SKA använda den vid tillfälle...


Nedan kan ni se hur man ställer in dom olika funktionerna med kronan (detta kommer ifrån Timefactors och jag har inte orkat översätta det så ni får hålla tillgodo med engelska


Analog Display
Dial and hands indicate local time.
Local time is indicated in the dial's digital display. (Not on the watch above).
The Various Functions of The Digital Display
As well as local time, you may select six additional functions whilst the crown is in position A (see diagram above). The selected function is indicated by a flashing line at the base of the digital display. The marker line which appears in the digital display without flashing, indicates the function currently in use.
All Functions Are Crown Selected.
Pushing or pulling the crown selects one of three positions (see diagram above).
Neutral Position (position A)
In this position, the various functions are selected by turning the crown clockwise or counter-clockwise.
Crown Pulled Out (Position B)
This position permits corrections or settings to be made by turning the crown clockwise or counter-clockwise.
Crown in Depressed Position (Position A1)
In this position, the alarm is turned on or off, the chronograph is operated, the 12 or 24 hour time indication is selected or the alarm tested.



SETTING THE VARIOUS FUNCTIONS

1. Synchronising Analog and Digital Time

  • Turn the crown when in position A to put the digital display into neutral (display turned off).
  • Pull the crown to position B (digital display turned on).
  • Turn the crown in either direction until analog and digital time are synchronised.
  • Push the crown back to position A.
2. Setting Exact Time (T1)
  • Select digital display T1 (line 1.1 flashes) by turning the crown when in position A.
  • Pull crown out to position B and the hours and minutes flash.
  • Set local time by turning the crown when in position B. Analog and digital times are set simultaneously.
  • Push the crown back into position A. The seconds display will continue flashing for another minute to permit synchronisation of the watch with a time signal.
  • At the time signal, press the crown briefly to position A1 (fully depressed) and the seconds will set to 00.
3. Date Correction (T1)
  • Select seconds and date display by turning the crown when in position A. Line 1.2 will flash, seconds are displayed to the left and the date to the right.
  • Pull the crown to position B. The seconds display will disappear and the month will be displayed in the centre (month and date will be flashing).
  • Adjust month and date by turning the crown when in position B. A fast turn adjusts the months, a slow turn adjusts the date.
  • Push the crown back to position A.
4. Weekday Correction (T1)
  • Select the day and date display (T1) by turning the crown when in position A. Line 1.3 will flash, the weekdays will appear to the left, and the date to the right.
  • Pull the crown into position B. The weekday display will flash and a letter will appear in place of the date. This indicates the language used in the weekday display. E for English, F for French and S for Spanish.
  • Turn the crown when in position B to set the desired language and day.
  • Push the crown back to position A.
5. Using the Timer
  • Turn the crown when in position A to select the timer function (TM), line 2 will be flashing.
  • Pull the crown into position B which will cause zero markings for hour and minutes to flash.
  • Set the desired timing interval by turning the crown whilst in position B. Fast turn sets the hours, slow turn sets the minutes.
  • Push the crown back to position A and the countdown commences. When the display counts down to 00.00, the alarm will sound.
  • To stop the alarm, push the crown into position A1. You may do this regardless of the setting of the digital display.
6. Interrupting the Timer (TM) and Re-setting it to Zero
  • Select the timer function (TM) by turning the crown when in position A and line 2 will flash.
  • Push the crown to position A1 for about 2 seconds. The countdown will be interrupted and the timer will re-set to zero.
7. Setting the Second Time Zone (T2)
  • Select function T2 by turning the crown whilst in position A and line 3 will flash.
  • Pull the crown out to position B and the hour display will flash.
  • Turn the crown whilst in position B until the desired hour is reached.
  • Push the crown back to position A.
8. Using the Chronograph (CH)
  • Select function CH by turning the crown whilst in position A and line 4 will flash.
  • Push the crown to position A1 at the desired moment and the time count will begin.
  • Push the crown back to position A1 and timing stops.
  • Push the crown to position A1 again and the time count will continue.
  • When timing is stopped after more than one hour of elapsed time, the minutes, seconds and 1/100th seconds are displayed and then, after an 8 second interval, the hours are displayed.
  • Push the crown to position A1 and hold for at least 3 seconds to re-set the chronograph to zero.
9. Using the Alarm (AL)
  • Select function AL by turning the crown in position A and line 5 will flash.
  • Pull the crown to position B and the hour and minutes will flash.
  • Turn the crown whilst in position B until the desired time is indicated. A fast turn sets the hours and a slow turn sets the minutes.
  • Push the crown back to position A. The letters AL will appear next to the time programmed, indicating that the alarm is set.
  • Push the crown to position A1 to stop the alarm sounding. This may be done regardless of the setting of the digital display.
10. Selecting and Cancelling the Alarm Function (AL)
  • Select function AL by turning the crown whilst in position A and line 5 will flash.
  • Push the crown to position A1. If the letters AL appear, the alarm is primed. If the letters OF appear, the alarm function is cancelled.
11. Testing the Alarm (AL)
  • Select function AL by turning the crown whilst in position A and line 5 will flash.
  • Push the crown to position A1 for more than 2 seconds and the alarm will sound.
  • Check that the alarm ON (AL) or OFF (OF) is selected as required.
12. Selecting the Time Zone (Winter or Summer Time)
  • Select digital display T1 by turning the crown whilst in position A and line 1.1 will flash.
  • Pull the crown to position B and the hours andd minutes will flash.
  • By giving the crown a fast turn, the time is adjusted in hourly increments. Analog and digital times are adjusted simultaneously.
  • Important: Shifts in minutes are corrected automatically during this procedure. Never make adjustments using the crown after turning it quickly.
  • Push the crown back into position A.
13. Changing From 24 Hr to 12 Hr Display and Back Again
  • Select function T2 by turning the crown whilst in position A and line 3 will flash.
  • Push the crown to position A1 once, and the letters A or P will appear, indicating that all digital time displays are on 12-hour mode. If no letter appears, the digital display is in the 24-hour mode.
  • Push the crown to position A1 twice and the operating mode changes from 24 hours to 12 hours or vice-versa. During the PM part of the day, a lower case P will appear on the 12-hour digital display.

Här nedan kan ni se lite olika varianter av 'TwoTimern'